Network (Mac) Filters - D-Link DIR-866L User Manual

Section 3 - Configuration
Use MAC (Media Access Control) Filters to control access to LAN (Local Area Network) computers by using their MAC addresses.
You can create a list of MAC addresses and then choose to either deny them access or allow them access to your network.
Configure MAC Select Turn MAC Filtering Off, Allow MAC addresses listed
Filtering: below, or Deny MAC addresses listed below from the drop-
down menu.
MAC Address: Create a list of MAC addresses by entering the MAC Address
of the computer you would like to filter, or select a Computer
Name from the drop-down list and click <<.
Note: To find the MAC address on a computer, please refer to the
Networking Basics section in this manual.
DHCP Client Computers that have obtained an IP address from the router's
List: DHCP server will be in the DHCP Client List.
Clear: Click Clear to remove the MAC address from the MAC Filtering
Rules list.
Click Save Settings.
D-Link DIR-866L User Manual

Network (MAC) Filters

80