Network (Mac) Filters - D-Link DIR-816L User Manual

Section 3 - Configuration
Use MAC (Media Access Control) Filters to control access to LAN (Local Area Network) computers by using their MAC addresses.
You can either manually add a MAC address or select the MAC address from the list of clients that are currently connected to
the Broadband Router.
Configure MAC Select. T urn.MAC.Filtering.Off, Allow.MAC.addresses.
Filtering: listed.below, or Deny.MAC.addresses.listed.below
from the drop-down menu.
MAC Address: Enter the MAC.Address you would like to filter.
Use the check box on the left to either enable or
disable the entry.
Note: To find the MAC address on a computer, please
refer to the Networking Basics section in this manual.
DHCP Client Select a DHCP.Client.from the drop-down menu and
List: click <<.to copy into the MAC.Address field.
Schedule: Select a pre-defined schedule or click on New.
Schedule to add one.
Click Save.Settings.
D-Link DIR-816L User Manual

Network (MAC) Filters

90