Table of Contents
Advertisement
WALL-MOUNTED ELECTRIC FIREPLACE/HEATER
Figure 1
Step 2: Choose a solid and plain wall. Position the mounting bracket where the appliance is to be installed
on the wall and ensure that the bracket is level. Using a pen mark the 4 holes through the 4 holes on the
mounting bracket as shown below (Figure 2)
Step 3: Take away the mounting bracket and then drill four 8mm diameter holes on the wall. Insert plastic
wall plug into the drilled holes (Figure 3). If installing the appliance on a solid wood wall there is no need
to drill the holes in the wood and no need for the plastic wall plug.
INSTALLATION INSTRUCTIONS
Step 4: Fix the mounting bracket using four M5×40 screws (Figure 4).
BFM EUROPE LTD
Page 6
Advertisement
Table of Contents
