Evacuation Mode; Saturated Carbon Filter; Auto Stop Fan; Auto Stop Lighting - DeDietrich DHD556XE1 Manual To Installation

3 / USING YOUR APPLIANCE

• EVACUATION MODE

Your hood has an external air outlet, configure
it for evacuation mode:
Simultaneously, but briefly press
The indicator either lights up or begins
flashing.
To configure the evacuation mode, briefly
press the control so that the
is lit (not flashing).
To change this configuration, briefly press
the control and the indicator light changes
modes. To confirm the new configuration,
press the control.

• SATURATED CARBON FILTER

When your hood is in recycling mode.
The indicator flashes, indicating that the
carbon filter must be changed (we recom-
mend that you replace your filters every six
months).
To turn out the
press and
The indicator stops flashing.

• AUTO STOP FAN

If you forget to turn off your hood, it will auto-
matically turn itself off after nine hours of oper-
ation.The hood goes into OFF mode.

• AUTO STOP LIGHTING

If you forget to turn off the light, it will auto-
matically turn itself off after nine hours of
operation.
and
indicator
indicator, simultaneously
hold the touch controls.
.
61
EN