Table of Contents
Advertisement
EN
2 / INSTALLING YOUR APPLIANCE
• ELECTRICAL CONNECTIONS
During installation and maintenance opera-
tions, the appliance must be unplugged from
the electrical grid; fuses must be cut off or
removed.
The electrical connections are made before
the appliance is installed in its housing.
Ensure that:
- the electrical installation has sufficient volt-
age,
- the electrical wires are in good condition,
- the diameter of the wires complies with the
installation requirements.
Warning
This appliance is delivered with a
H 05 VVF power cord that has three-
0.75 mm
conductors (neutral, phase and
2
ground). It must be connected to the main
power supply (which should be a 220-240 V
single phase current) via a CEI 60083 stan-
dardised socket that should remain accessi-
ble after installation, in keeping with instal-
lation guidelines.
We cannot be held responsible for any acci-
dent resulting from an inexistent, defective
or incorrect ground lead. The fuse for your
installation must be 10 or 16A. If the power
cable is damaged, call the after-sales serv-
ice department in order to avoid danger.
Warning
If the electrical installation at your
residence requires any changes in order to
hook up your appliance, call upon a profes-
sional electrician.
Warning
If the hood displays any malfunctions,
unplug the appliance or remove the fuse
corresponding to the electrical socket
where your appliance is plugged in.
52
Advertisement
Table of Contents
