Table of Contents
Advertisement
Cassette Type Fan Coil Unit Owner`s Manual
3.1 Guide for operation-general operation
P ress ON/OFF button to start the unit after poweringthe
① .
main unit on.(Note: Power the unit on every time,the big-guide
louver and small-guide louver will beclosed firstly.)
P ress MODE button to select desired running mode.
② .
P ress +/ - button to set the desired temperature.(It is
③ .
unnecessary to set the temperature at AUTO mode)
P ress FAN button to set fan speed, the AUTO FAN,LOW,
④ .
MID or HIGH could be selected.
P ress
and
⑤ .
3.2 Guide for operation-optional operation
P ress SLEEP button, set the sleep mode.
① .
P ress TIMER button, then press +/- button,
② .
to set the cheduled timer on or timer off.
P ress light button to control displayer light on or off.
③ .
P ress X-FAN button to set X-FAN function on or off.
④ .
P ress turbo button to set this function on or off.
⑤ .
3.3 Introduction for special function
● About X-FAN function
This function indicates that moisture on evaporator of indoor unit will be blowed after the unit
About X-FAN functionis stopped to avoid mould.
Having set X-FAN function on: After turning off the unit by pressing ON/OFF buttonindoor fan will
continue running for about 10 min. at low speed. In this period, press X-FAN button to stop indoor
fan directly.2. Having set X-FAN function off: After turning off the unit by pressing ON/OFF button,
the complete unit will be off directly.
● About AUTO RUN
When AUTO RUN mode is selected, the setting temperature will not be displayed on the LCD,
the unit will be in accordance with the room temp. automatically to select the suitable running
method and to make ambient comfortable.
● About turbo function
If start this function, the unit will run at super-high fan speed to cool or heat quickly so that the
ambient temp. approachs the preset temp. as soon as possible.
● About lock
Press +and - buttons simultaneously to lock or unlock the keyboard. If the remote controller is
locked, the icon
will be displayed on it, in which case, press any button, the mark will flicker for
three times. If the keyboard is unlocked, the mark will disappear.
● About switch between Fahrenheit and Centigrade
Under status of unit off, press MODE and - buttons simultaneously to switch ºC and ºF.
● About new function of defrosting
It indicates: after starting this function by remote controller and the unit has been under defrost
button to set swing mode.
5
Advertisement
Table of Contents
