Cassette Type Fan Coil Unit Owner`s Manual
7.2 Precoutions for drainage raising pipe
Install the drainage raising pipe at a height of less than 280mn.
Install the drainage raising pipe at a right angle to the indoor unit and no more than 300 mm
from the unit.
Note:
The incline of attached drain hose ① should be 75mm or less.so that the drainage socket does
not have to stand additional force.
If converging multiple drainage pipes,install according to the procedure shown below.
Select converging drainage pipes whose gauge is suitable for the operating capacity of the unit.
7.3 Connection of the motorized valve
(1). The installation of the motorized valve should be done according as Fig.2:firstly connect
one end of the tube joint with the water inlet tube of the unit, then connect the other end with the
Torque wrench
Valve
Tape
Water tube joint
Flare nut
T h r e a d
Spanner
fasten
Water inlet tube
Wiring interface
11