Cassette Type Fan Coil Unit Owner`s Manual
♦ If gap is still left between the ceiling and the panel after screwing the screws, readjust height
of the indoor unit body.
After fixing, be sure no gap left between the ceiling and the panel.
♦ Wiring of the decoration panel.
Connect to joints for swing flap motor lead wire(an 2 places)installed on the panel.
8. Test operation
8.1 Prepare for test
(1). Do not turn on the power switch before all installation is finished
(2). Connect wires correctly and firmly.
(3). Open the check valve.
(4). Remove all dust.
8.2 Testing
(1). Turn on the power switch and press "ON/OFF" button.
(2). Press "MODE" button select COOL, HEAT,FAN, etc to test whether it operates normally.
15