Getting Started; Baby Unit Power Supply; Parent Unit Battery Installation - Motorola MBP36S User Manual

2.1

Baby Unit Power Supply

1. Connect the small plug of the power adapter to the baby unit (camera) and
the other end to a suitable mains power socket.
2.2

Parent Unit Battery Installation

2. Slide the ON/OFF switch to the ON position. The power LED will light up
in green.
3. Slide the ON/OFF switch to the OFF position to turn the Baby Unit off.

2. Getting Started

1. Insert the wire tab of the rechargeable battery pack into the contact slot as
shown above and fit the battery pack into the compartment.
NOTE
Only use the enclosed power adapter (5V DC / 1000mA).
2. Replace the battery cover over the compartment and gently tighten the
screw in a clockwise direction using a Small cross head or Flat end screw
drivers.
Getting Started
Red
Black
Small cross head or
Flat end screw driver
9