STACKED ISO UNITS PROVISION
*
Note: Refer also to the instructions included with the aftermarket radio.
1 Cut and remove the center bar from
the radio housing. (Figure A)
2
Snap the Double DIN brackets to the
inside edge of the radio housing.
(Figure B)
3
Slide the stacked ISO units into the
bracket/radio housing assembly and
secure the units to the kit using the
screws supplied with the units.
(Figure C)
4
Snap the Double DIN trim plate into the
radio housing. (Figure C)
Continue to final assembly.
99-7604 KIT ASSEMBL Y
8
A
B
C