3.4
Adjusting the seat depth
The Vermeiren Sagitta, Sagitta SI is standard adjustable in 3 seat depths by changing the
length and type of the frame. This should be decided at the purchase.
Seat depth
330 mm (12.99 in.)
380 mm (14.96 in.)
420 mm (16.54 in)
As option there is also a long type of frame available for seat depths 440 mm (17.32 in) and
460 mm (18.11 in) with a 650 mm frame length. This long type of frame is not available for
the Sagitta SI.
3.5
Adjust the brakes
L
Risk of injury – Brakes may only be adjusted by your specialist
WARNING:
dealer.
Adjust the brakes according following rules:
3.6
Adjusting the angle of the rear wheels
Length of the frame
550 mm (21.65 in.)
600 mm (23.62 in.)
650 mm (25.59 in.)
Table 5: Seat depth
1. Install the wheels according § 2.2.
2. Disconnect the brakes by pulling lever
backwards.
3. Loosen the bolts
mechanism can slide over the tube of the frame
.
4. Pull the brake mechanism over the tube of the
frame
to the desired position.
5. Retighten the bolts .
6. Check working of the brakes.
7. If necessary repeat the above steps until the
brakes are adjusted well.
The angle of the rear wheels is adjustable in 5 sizes
(0°, 2°, 4°, 6°, 8°) by changing the axle of the
rear wheels.
Page 17
Sagitta, Sagitta SI
Type of the frame
Standard
Standard
Standard
so the brake
2011-05