Components; Accessories; Location Identification Plate - Vermeiren SAGITTA Instruction Manual

The wheelchair complies to the requirements set up in:
ISO 7176-8: Requirements and test methods for static, impact and fatigue strengths.
ISO 7176-16: Resistance to ignition of upholstered parts
1.3

Components

1.4

Accessories

The following accessories are available for the Sagitta wheelchairs:
Anterior pelvic belts (B44, U01, U73, U74, U75, U76) for mounting on the tubes of
the back (see according manual)
Anti-tipping device (B78) for mounting on the bottom frame (see according manual).
Long type frame (seat depth 440 and 460 mm)
Splash guards
Push handles
Spoke protector (B85)
Travel wheels (B86)
1.5

Location identification plate

1 = Back
2 = Arm supports (if available)
3 = Splash guard
4 = Driving wheels (rear
wheels)
5 = Hand rims
6 = Shafts
7 = Brakes (Sportbrakes)
8 = Front fork
9 = Steering wheels (front
wheels)
10 = Seat
11 = Base frame
12 = Foot bracket
1 = Sagitta name
2 = Identification plate
3 = Name Vermeiren
Page 6
Sagitta, Sagitta SI
2011-05