Manual Harvest; Replace Control Board; Usb Setup - Manitowoc Indigo Series Technician's Handbook

MANUAL HARVEST

Press the Checkmark with Manual Harvest highlighted
to initiate a manual harvest.
Manual Harvest
• Harvest Started
• Exit

REPLACE CONTROL BOARD

Press the Checkmark with Replace Control Board
highlighted to program the replacement control board.
The data can copied from the defective control board
(refer to "Exporting Data to a Flash Drive" on page 98),
or entered manually through the Indigo interface.
• Manual Setup
• Board Install Date
• Input Model Number
• Input Serial Number
• Condenser/condensing unit serial number
•

USB Setup

• Insert Drive
• Press Checkmark and wait for completion
• Exit
USB SETUP
• USB Stick
• Download Firmware
Insert drive and wait for completion
• Download Configuration
Insert drive and wait for completion
• Export All
Insert drive and wait for completion
• Export Setup
Insert drive and wait for completion
• Exit
88 Part Number STH025 8/12