KTD-S0008-F
9
PS/2 Keyboard and Mouse Interface
The Super-I/O of the JRexplus-DC supports a PS/2 keyboard and mouse. A PS/2 keyboard can be directly
connected to this interface. If you intend to use a PS/2 mouse connect a Y-cable to this interface. There are
many different Y-cables available on the market. Some cables have reverse keyboard/mouse signals. If your
keyboard and mouse do not work connect the keyboard to the mouse side and vice versa.
9.1
Connector
The keyboard/mouse interface is available through the standard miniDIN connector J26 (6 pins). A Y-cable
is deliverable from KONTRON (KAB-PS/2Y-1, part number 96001-0000-00-4)
Header
6 5
4
2 1
Note:
To protect the external power lines of peripheral devices make sure that
1)
- the wires have the right diameter to withstand the maximum available current.
- to enclosure of the peripheral device fulfills the fire-protecting conditions of IEC/EN 60950.
Page 22
Pin
Signal Name
1
KBDAT
2
MSDAT
3
GND
3
4
VCC
KBCLK
5
MSCLK
6
JRexplus-DC User's Guide
PS/2 Keyboard and Mouse Interface
Function
Keyboard data
Mouse data
Ground
1)
Power +5V (fused)
Keyboard clock
Mouse clock