Graphics Interface; Dvi Or Crt Connector - Kontron JRexplus-DC User Manual

KTD-S0008-F
7

Graphics Interface

The graphics interface supports DVI or CRT monitors and a variety of LCD panels with dual channels, color
depth of 18 bit and resolutions up to 1920x1200 for DVI/CRT and UXGA (1600x1200) for LCD.
7.1

DVI or CRT Connector

The DVI and CRT interface are available through the standard 29 pin I style DVI connector J11.
Header
17
C3
C4
Note: To protect the external power lines of peripheral devices make sure that
1)
- the wires have the right diameter to withstand the maximum available current.
- to enclosure of the peripheral device fulfills the fire-protecting conditions of IEC/EN 60950.
Page 13
Pin Signal Name
TMDS2-
1
TMDS2+
2
9 1
3
4
5
DDC_CLK
6
7 DDC_DATA
8 VSYNC
C1
9 TMDS1-
C2
10 TMDS1+
11
12
13
14 VCC
15
16 TMDS_HPD
17 TMDS0-
TMDS0+
18
19
20
21
22
TMDS_CLK+
23
TMDS_CLK-
24
C1
C2
C3
C4 HSYNC
C5
JRexplus-DC User's Guide
Function
TMDS data 2 (negative)
TMDS data 2 (positive)
GND
Ground
N.C.
Not connected
N.C.
Not connected
DDC clock
DDC data
Analog vertical sync
TMDS data 1 (negative)
TMDS data 1 (positive)
GND
Ground
N.C.
Not connected
N.C.
Not connected
1)
Power +5V
GND Ground
Hot plug detect
TMDS data 0 (negative)
TMDS data 0 (positive)
GND
Ground
N.C.
Not connected
N.C.
Not connected
GND
Ground
TMDS clock (positive)
TMDS clock (negative)
RED
Analog red
GRN Analog green
BLU Analog blue
Analog horizontal sync
GND Analog ground
Graphics Interface