Table of Contents
Advertisement
Quick Links
Advertisement
Table of Contents
Related Manuals for Telikou TF-204
Summary of Contents for Telikou TF-204
- Page 1 TF-204 Two Channel Four Wire Interface Instruction Manual © 2006 TELIKOU Systems All Rights Reserved While TELIKOU makes every attempt to maintain the accuracy of the information contained in its product manuals, that information is subject to change without notice...
- Page 2 Thank you for choosing TELIKOU intercom product. Before use, we recommend you read through this manual to better understand the function of TF-204. If you have any question that does not addressed on this manual, please contact your dealer or call us.
- Page 3 TELIKOU TF-204 Four-Wire Interface Repeat this procedure for Channel B. Output Level 3. Output Level Indicator Green light indicates output level normal. Red light indicates output level high. 4. Output Level Particular Adjustment Adjust the Output level which transmits from terminal block connector pin 3 and 4.
- Page 4 To connect a 4-wire device to the interface, for each module, attach one set of 4-wire output lines to one set of terminal block connectors on the TF-204 rear panel. On the terminal block, pins 1 and 2 are for input (IN) and pins 3 and 4 are for output (OUT).
-
Page 5: Technical Specification
TELIKOU TF-204 Four-Wire Interface Solution 2: Adjust. Refer to the procedure in the Front Panel section of this manual. Set the MS-800 termination switch to the ON position. Cause 3: A headset cord is too long or jointing quality . - Page 6 TELIKOU TF-204 Four-Wire Interface Output: Isolated Environmental 0°-70°C（32°-158°） Dimensions 19” (W) x 1.75” (H) x 4.96” (D), 483mm x 44.5mm x 126mm Weight 1.5kg...
Need help?
Do you have a question about the TF-204 and is the answer not in the manual?
Questions and answers