Cleaning The Carrier Sheet - Fujitsu ScanSnap IX500 Operating Instructions Manual

Cleaning the Carrier Sheet

As you keep using the Carrier Sheet, dirt and dust will accumulate on the surface and the inside.
Clean the Carrier Sheet regularly because it may result in scanning errors.
The procedure for cleaning the Carrier Sheet is as follows.
Cleaning
Gently wipe the dirt and dust off the surface and the inside of the Carrier Sheet with a dry cloth, or a
cloth moistened with Cleaner F1/mild detergent.
ATTENTION
l Do not use paint thinner or any other organic solvents.
l Do not use force to rub. The Carrier Sheet may be damaged or deformed.
l Be careful not to leave any crease on the Carrier Sheet.
l After cleaning the inside of the Carrier Sheet with a cloth moistened with Cleaner F1/mild detergent,
make sure that it is completely dry before closing the Carrier Sheet.
l The Carrier Sheet should be replaced approximately every 500 scans.
124
Cleaning the Carrier Sheet