Buffalo LinkStation LS-VL User Manual page 58

Using your LinkStation
Notes: • To use the LinkStation with Jumbo Frame, your router/switch/hub must support Jumbo
Frame.
• To use Jumbo Frame (4102/7422/9694 bytes), your computer's NICs and all switches, hubs,
and routers on the transmission route need to support Jumbo Frame. If any device on the
route does not support Jumbo Frame, use standard transmission (1518 bytes) instead.
• If you are using Jumbo Frame and back up data from a LinkStation/TeraStation to another
LinkStation/TeraStation, set the Ethernet frame sizes of the LinkStations/TeraStations to the
same settings (or the closest available). If the Ethernet frame sizes are significantly different,
the backup job may fail. If you have problems with backup jobs, select the default frame
size (1518 bytes).
LinkStation User Manual
C o nne ction
LinkStation
Jumbo Frame Ju mbo Fra me
(4102 /7 422/9694) supported
LinkStation
Ju mbo Frame Ju mbo F ram e
(4102/7422/969 4) Supported
LinkStation
Ju mbo Frame Ju mbo F ram e
(4102/7422/969 4) not supported
LinkStation
Ju mbo Frame Ju mbo F ram e
(4102/7422/969 4) not supported
T ra nsm is si on
J um bo F ra m e
supported
J u m bo Fra m e
not supported
J u m bo Fra m e
not supported
J u m bo Fra m e
supported
Transmit
Jumbo Frame
(4102/7422/9694)
Transmit
normally(1 518 )
Transmit
normally(1 518 )
No transmission
57