Buffalo LinkStation LS-VL User Manual page 180

Appendix
Power LED flashing amber
The Power LED flashes amber with information codes. The way it flashes indicates the message.
Note: If the Power LED is flashing amber, you can open NAS Navigator2. It will tell you the status of
the LinkStation.
Place
10s place
1s place
Information codes
I01
I19
I20
I21
I23
I25
I26
I27
I28
LinkStation User Manual
Status
The LED illuminates for 1.0 seconds every 0.3 seconds.
The number of flashes is the tens place of the information code.
The LED illuminates for 0.5 seconds every 0.3 seconds.
The number of flashes is the ones place of the information code.
Descriptions
Checking the system area.
Erasing disk (fills disk with zeros).
Formatting the hard drive.
Checking the hard drive.
Initializing the system settings.
Updating the firmware.
Initializing the settings in the Web Admin interface.
Checking a USB hard disk.
Formatting a USB hard disk.
179