Buffalo LinkStation LS-VL User Manual page 153

Chapter 4 Web Admin interface
Name
Storage
Format Disk
Disks
LinkStation User Manual
Descriptions
You may format disks in or connected to the LinkStation. All data on
the disk will be deleted if the drive is formatted. Back up any important
data before formatting a disk.
You cannot format a drive if you've scheduled a backup job. Also, do
not format the drive if it's configured as the backup target of another
LinkStation.
The following tasks open a [Confirm Operation] screen.
• Delete Folder
• LinkStation's Restore Factory Defaults
• Erase Disk of the LinkStation
Enter the number shown in the [Confirmation Number] field within 60
seconds, and click [Apply].
The LinkStation can format or recognize the following format types:
Format type
EXT3
(USB hard drive
only)
Descriptions
EXT3 is recommended for external drives
attached to the LinkStation.
• You can perform both Read and Write.
• Supports Journaling File System.
• May take a while to format (a few minutes to a
hour).
• Less space is available than XFS after
formatted.
• More files in 1 folder, slower the access space.
Note: An EXT3 Reader is included in this
package for reading EXT3 disks from a
Windows PC.
152