Buffalo LinkStation LS-VL User Manual page 164

Chapter 4 Web Admin interface
Name
Restore/Erase
Upon restore Click [Modify Settings] and select whether or not Initialization will reset the
Restore
LinkStation
Restore
Factory
Defaults
Erase
Erase
LinkStation User Manual
Descriptions
admin password.
Note: If [Keep current admin password] has been selected, you cannot
reconfigure the LinkStation without the password. Please write down the
password and keep it in a safe place!.
The following settings are initialized by [Restore LinkStation].
LinkStation Name, Description, NTP Settings, Workgroup Settings, Shared
Service Settings, Access Restrictions for Shared Folders, User Settings, User
Group Settings, E-mail Notification, UPS Settings, Backup Jobs Setup, Admin
username and password, Print server settings, WebAccess, Language settings,
SleepTimer, HDD Spindown, Media server settings, BitTorrent settings, Time
Machine configuration, Web Server, and MySQL Server.
Note: The following tasks require a [Confirm Operation] screen.
• Delete Folder
Restore LinkStation
•
Format LinkStation
•
• Erase Disk
Enter the number shown in the [Confirmation Number] field within 60 seconds,
and click [Apply].
Clicking [Erase] will erase data completely on the hard drive of the LinkStation.
Note: • All data will be erased. There is no "undo" for this!
• While erasing, the settings for the LinkStation cannot be changed.
163