Buffalo LinkStation LS-VL User Manual page 16

Chapter1 Setup
Back
3
4
6
7
5
7
LinkStation User Manual
3
Fan
Do not block the fan when installing the unit.
4
USB 2.0 Connector
You may attach a USB device such as a digital camera,
printer, memory card reader, or hard drive. USB hubs, mice,
keyboards, and all-in-one printers are not supported. USB
card readers that support multiple memory cards may not
function properly.
5
Power Mode Switch
5
AUTO: Automatically powers the LinkStation on and off with
your computer.
8
ON: Turns the LinkStation on.
OFF: Turns the LinkStation off.
6
LAN Port
LED by the LAN port turns green when the unit is connected
to the network and flashes when there is network activity.
7
Power Connector
connected properly, the LED to the right will glow green.
8
Hook
8
Connect an Ethernet cable here. The Link/Act
Connect the AC adapter here. When it's
Use as a strain relief for the AC adapter cable.
15