Software - Toshiba e-STUDIO203S Service Manual

10. Software

The CD-ROM that accompanies the machine contains the following
software:
MFP driver
Printer driver
The printer driver enables you to use the printer function of the
machine.
The printer driver includes the Print Status Window. This is a utility
that monitors the machine and informs you of the printing status,
the name of the document currently being printed, and error mes-
sages.
Please note that the Print Status Window does not operate when
the machine is used as a network printer.
Scanner driver*
The scanner driver allows you to use the scanning function of the
machine with TWAIN-compliant and WIA-compliant applications.
Desktop Document Manager*
Desktop Document Manager is an integrated software environment
that makes it easy to manage documents and image files, and
launch applications.
Button Manager*
Button Manager allows you to use the scanner menus on the
machine to scan a document.
*: The scanning feature can only be used with computers that are
connected to the machine by a USB cable.
A. Before installation
Hardware and software requirements
Check the following hardware and software requirements in order to
install the software.
Computer type IBM PC/AT or compatible computer equipped
with a USB 2.0/1.1*
Operating Windows 98, Windows Me, Windows 2000
2 3
system* * Professional*
Windows XP Home Edition*
Display 1024 x 768 dots (XGA) display with 16bit
Hard disk free 150 MB or more
space
Other hardware An environment on which any of the operating
requirements systems listed above can fully operate
*1: Compatible with Windows 98, Windows Me, Windows 2000
Professional, Windows XP Professional, Windows XP Home
Edition or Windows Vista preinstalled model standardly
equipped with a USB port.
*2: Printing is not available in MS-DOS mode.
*3: The machine does not support printing from a Macintosh envi-
ronment.
*4: Administrator's rights are required to install the software using
the installer.
Installation environment and usable software
The following table shows the drivers and software that can be
installed for each version of Windows and interface connection
method.
Operating Printer
Cable
system driver
USB Windows 98/ Available*
Me/2000/XP/
Vista
*1: The printer driver that is installed will vary depending on the
type of connection between the machine and your computer.
Install the software according to the Operation Manual.
1
4 4
, Windows XP Professional* ,
4
, Windows Vista*
Desktop
Scanner Button
Document
driver Manager
Manager
1
Available
e-STUDIO203S/203SD UNPACKING AND INSTALLATION 5 - 5
B. Installing the software
Note:
• The screen images in this manual are mainly for Windows XP.
With other versions of Windows, some screen images may be dif-
ferent from those in this manual.
• In the following explanations it is assumed that the mouse is con-
figured for right hand operation.
• If an error message appears, follow the instructions on the screen
to solve the problem. After the problem is solved, the installation
procedure will continue. Depending on the problem, you may
have to click the "Cancel" button to exit the installer. In this case,
reinstall the software from the beginning after solving the prob-
lem.
1) The USB cable must not be connected to the machine. Make
sure that the cable is not connected before proceeding.
If the cable is connected, a Plug and Play window will appear. If
this happens, click the "Cancel" button to close the window and
disconnect the cable.
Note: The cable will be connected in step 13).
2) Insert the CD-ROM into your computer's CD-ROM drive.
3) Click the "start" button, click "My Computer", and then double-
click the CD-ROM icon.
• In Windows Vista, click the "Start" button, click "Computer",
and then double-click the CD-ROM icon.
• In Windows 98/Me/2000, double-click "My Computer", and
then double-click the CD-ROM icon.
4) Double-click the "setup" icon.
In Windows Vista, if a message screen appears asking you for
confirmation, click "Allow".
5) The "SOFTWARE LICENSE" window will appear. Make sure
that you understand the contents of the software license, and
then click the "Yes" button.
Note: You can show the "SOFTWARE LICENSE" in a different lan-
guage by selecting the desired language from the language
menu. To install the software in the selected language, con-
tinue the installation with that language selected.
4
6) Read the "Readme First" in the "Welcome" window and then
click the "Next" button.
7) To install all of the software, click the "Standard" button and go
to step 12).
To install particular packages, click the "Custom" button and go
to next step.