Toshiba e-STUDIO203S Service Manual page 100

Main Sub
Contents
code code
46 12 Density adjustment in the
FAX mode (Collective
adjustment) (Executable
only when the FAX is
installed.)
13 FAX mode density
adjustment (normal text)
(Executable only when the
FAX is installed.)
14 FAX mode density
adjustment (Fine text)
(Executable only when the
FAX is installed.)
[Function]
When [START] key is pressed, scan is executed with the entered exposure adjustment value
and the data stored on the FAX side is rewritten into the entered value.
All data of the exposure adjustment values are rewritten into the same value.
For the density adjustment table data, refer to TC46-13 (density adjustment (normal text) in the
FAX mode).
[Operation]
1) Initial display
ADJUST EXP.
("XX" is the exposure adjustment value of
normal text stored on the FAX side.)
2) Enter a 2-digit value as the exposure
adjustment value.
ADJUST EXP.
("YY" is the entered exposure adjustment
value.)
[Function]
Scan is started with the exposure adjustment value entered with [START] key, and the stored
data of the selected mode on the FAX side is rewritten into the input value.
Density adjustment value data table
Mode
STD (Normal text)
Fine (Fine text)
Sfine (Super fine)
When initializing each data: 50
[Operation]
1) Initial display
ADJUST EXP.
("XX" is the corresponding exposure adjust-
ment value of normal text mode stored on the
FAX side.)
2) Enter a 2-digit value as the exposure
adjustment value with [10KEY].
ADJUST EXP.
("YY" is the entered exposure adjustment
value.)
[Function]
When [START] key is pressed, scan is started with the entered exposure adjustment value and
the data of the selected mode on the FAX side is changed to the entered value.
For the density adjustment value table data, refer to TC46-13 (FAX mode density adjustment
(normal text).)
[Operation]
1) Initial display
ADJUST EXP.
("XX" is the corresponding exposure adjust-
ment value of the fine text mode stored on
the FAX side.)
2) Enter a 2-digit value as the exposure
adjustment value with [10KEY].
ADJUST EXP.
("YY" is the entered exposure adjustment
value.)
e-STUDIO203S/203SD TEST COMMAND, TROUBLE CODES 10 - 19
Details of function/operation
3) Scan is started (self print), and the LED
of [START] key is turned off.
AUTO
XX ADJUST
SCAN
4) Print is started (self print).
ADJUST
PRINT
AUTO
After completion of printing, returns to "2)"
YY
display.
Photo Exposure adjustment value
off
on
off
on
off
3) Scan is started (self print), and the LED
of [START] key is turned off.
STD
XX ADJUST
SCAN
4) Print is started (self print).
ADJUST
PRINT
After completion of printing, returns to "2)"
STD
display.
YY
3) Scan start (self print)
FINE ADJUST
XX SCAN
4) Print start (self print)
ADJUST
PRINT
After completion of printing, returns to "2)"
display.
FINE
YY
EXP. AUTO
YY
EXP. AUTO
YY
EXP. STD
YY
EXP. STD
YY
EXP. FINE
YY
EXP. AUTO
YY