Table of Contents
Advertisement
Main
Sub
Contents
code
code
46
29
Image contrast adjustment
(600dpi) (GAMMA 600)
30
AE limit adjustment (AE
LIMIT)
31
Image sharpness
adjustment (SHARPNESS)
[Function]
Contrast is set for each mode.
When this test command is executed, the current se value is displayed in 2 digits (Default: 50).
Change the set value and press [START] key to make a copy under the set value.
When the set value is increased, the contrast becomes higher. When the set value is
decreased, the contrast becomes lower.
In this case, only Exp.3 copy is made. When, however, the setting is made to make higher con-
trast, Exp.1 and Exp.5 copies also become in higher contrast. When made to a lower contrast,
Exp1. and Exp.5 copies become lower contrast, too.
←
→
Press [
/
] key to switch the mode. The set value of the selected mode is displayed on the
LCD. (Adjustment value: 1 – 99)
Mode
AE mode (600dpi)
TEXT mode (600dpi)
PHOTO mode
TS mode (TEXT)(600dpi)
TS mode (AE)(600dpi)
∗
No density display on LCD.
[Operation]
The operation is similar to test command 46-01.
[Function]
Used to set the limit value in AE and AE (toner save).
Change the setting and press [ENTER/START] key to write the setting into the EEPROM. The
machine goes into the sub code entry standby mode.
←
→
By pressing [
/
] key, setting is changed. (Setting range: 0 – 31, Default: 0)
Mode
Limit value for AE
Limit value for AE (toner save)
<Remark>
When test command 26-06 (Destination setting) or test command 46-19 Auto Exposure mode
is changed, the setting of this test command is also changed to the default in connection.
[Operation]
The operation is similar to test command 46-19.
[Function]
Used to adjust sharpening/blurring of image in each mode.
Image quality
Setting No
Blurring
Standard
Sharpening
When this test command is executed, warm-up and shading are performed and the current set
value is displayed. (Default: 1)
Change the set value and press [START] key to make a copy under the set conditions.
To change the mode, press [
the LCD.
Mode
AE mode
TEXT mode
PHOTO mode
TS mode (TEXT)
TS mode (AE)
[Operation]
The operation is similar to test command 46-01.
e-STUDIO203S/203SD TEST COMMAND, TROUBLE CODES 10 - 22
Details of function/operation
Display item
Default
AE
50
TEXT
50
PHOTO
50
TSTXT
50
TSAE
50
Display item
AE
TEXT
Remark
0
1
Default
2
←
→
/
] key. The code number of the selected mode is dip0slayed on
Display item
Default setting
AE
1
TEXT
1
PHOTO
1
TSTXT
1
TSAE
1
LED
COPY mode lamp
PRINT mode lamp
SCAN mode lamp
PRINT mode lamp
SCAN mode lamp
COPY mode lamp
SCAN mode lamp
Remark
LED
COPY mode lamp
PRINT mode lamp
SCAN mode lamp
PRINT mode lamp
SCAN mode lamp
COPY mode lamp
SCAN mode lamp
Hide quick links:
Advertisement
Table of Contents
