Table of Contents
Advertisement
Security Codes & Authority Levels
About Security Codes
Your installer assigned a master code that is used to perform all system functions.
In addition, you can assign up to 30 different security codes for use by other users.
• Only the System Master can assign user codes to users.
• Users are identified by 2-digit user numbers.
• In addition to a security code, each user is assigned various system attributes.
• User codes can be used interchangeably when performing system functions (a
• User code programming involves these steps:
Authority Level Definitions
Authority levels define the system functions a particular user can/cannot perform.
Level Title
N/A
0
1
2
3
– 32 –
www.PDF-Zoo.com
system armed with one user's code can be disarmed by another user's code), with
the exception of the guest code described below.
1. Choose a user number and assign a 4-digit security code.
2. Assign an authority level to that user.
3. Assign other attributes as necessary (see attributes on the next page).
NOTE: The factory settings are designed to meet most normal user situations.
Therefore, the only step you usually need to do when adding users is assign a user
number and a security code.
Explanation
System Master
Reserved for user 02; Can perform all system functions and assign
(default = 1234)
codes; can change its own code as follows:
Master code + [8] + 02 + new master code + new master code again
Standard User:
Can only perform security function.
Cannot perform other system functions.
Arm Only:
Can only arm the system. Cannot disarm or do other functions.
Guest:
Can arm the system, but cannot disarm the system unless the system
was armed with this code. This code is typically assigned to someone
(e.g., babysitter or cleaner) who has a need to arm/disarm the system
only at certain times. The user of this code should not use the "Quick
Arming" feature.
Duress Code:
Intended for use when you are forced to disarm or arm the system under
threat. When used, the system will act normally, but can silently notify
the Central Monitoring Station of your situation, if that service has been
provided.
Advertisement
Table of Contents
