Table of Contents
Advertisement
Entry Delay
Entry Delays give you time to disarm the system when you re-enter through the
designated entrance door. You must disarm the system before the entry delay period
ends, or an alarm will occur. The keypad beeps during the entry delay period, reminding
you to disarm the system. There are two entry delays (if programmed). The first is for
your primary entrance and the second can be used for a secondary entrance, where a
longer delay is required to walk to the keypad to disarm the system.
You can also arm the system with no entry delay at all by using the INSTANT or
MAXIMUM arming mode. This mode provides greater security while on the premises or
while away for extended periods of time.
See your installer for your delay times.
Exit Delay
Exit delay gives you time to leave through the designated exit door without setting
off an alarm. Exit delay begins immediately after arming your system in any
arming mode and Alpha Display keypads display the message "You May Exit Now."
When "You may exit now" disappears, the system is fully armed. If programmed, a
slow beeping will sound during the exit delay period until the last 10 seconds,
which then changes to fast beeping (alerting you to the end of exit delay). If you
cannot leave within this delay time period, you should stop, disarm the system, and
start over to avoid a false alarm.
U U U U L L L L
Exit Delay Restart (if programmed): If you wish to open the entry/exit door to let
someone in after arming STAY, you can restart the exit time delay at any time –
simply press the [✱] key, then let that person in. The system automatically
rearms when the exit delay expires, thereby avoiding having to disarm the system
and then rearm it again.
Additionally, when the system is armed AWAY, reopening and closing the
entry/exit door before exit delay time expires (e.g., reentering to get a forgotten
item) will reset the exit delay time.
www.PDF-Zoo.com
Exit Delay:
seconds
The Exit Delay Restart Feature cannot be used for UL Installations.
Entry/Exit Delays
Entry Delay 1:
seconds
Entry Delay 2:
seconds
– 15 –
Advertisement
Table of Contents
