About Manual Paging; Latch Key Paging - Honeywell LXL-1000 User Manual

About Manual Paging

Your system may be set up so you can manually send a message to up to two pagers.
1. Press and hold the programmed Paging Key for at
2. The recipient, on seeing the 999–9999 message, will
*

Latch Key Paging

You can program a schedule that causes a pager report to be sent if the system is not
DISARMED by the scheduled time (see Scheduling section, event "03"). For example,
a working parent might want a message to be sent to a pager if their child did not
arrive home from school and disarm the system by a certain time.
If programmed, the message that is sent is:
www.PDF-Zoo.com
• Your installer programs the paging function key and the pager phone numbers.
• Pressing the paging keys sends the message
• This message could mean "call home", "call your office", or any other prearranged
meaning.
• See the Paging chart at the back of this manual for details of the paging setup for
your system.
least 2 seconds (wait for beep), then press the pager
number* (1-2) representing the pager intended to
receive the message.
understand the prearranged meaning of this signal.
If no number is pressed, the message is sent to pager 1
Paging Feature
9 9 9 – 9 9 9 9 to the selected pager.
Alpha Display:
✱✱✱✱
READY TO ARM
Fixed-Word Display: READY
999-9999
.
Pager Display
7 7 7 – 7 7 7 7 .
(cont'd)
DISARMED
✱✱✱✱
– 31 –