Fixed-Word Display Keypad - Honeywell LXL-1000 User Manual

FIXED-WORD DISPLAY KEYPAD

NIGHT-STAY:
INSTANT:
BYPASS:
NOT READY:
CANCELED:
– 11 –
www.PDF-Zoo.com
AWAY:
All burglary zones, interior and
perimeter, are armed.
STAY:
Perimeter burglary zones, such as
protected windows and doors, are
armed.
When specific interior zones are
armed and all others bypassed, the
NIGHT and STAY indicators are both
on.
Entry delay is turned off:
Lit with STAY = Instant mode
Lit with AWAY = Maximum mode
This appears when one or more burglary protection zones have been bypassed.
Appears when burglary portion of the system is not ready for arming (due to open
protection zones). The system is ready to arm when this message disappears and
the READY indicator light comes on.
NO AC:
Appears when AC power has been cut off. System is operating on backup battery
power.
AC:
Appears when AC power is present.
CHIME:
Appears when the chime feature is activated.
BAT:
Low battery condition in a wireless sensor (if zone number displayed) or low
system battery (if no zone number displayed).
ALARM:
Appears when an intrusion has been detected and the system is armed (also
appears during a fire alarm or audible emergency alarm). Accompanied by the
protection zone in alarm.
CHECK:
Appears when a malfunction is discovered in the system at any time, or if an open
is detected in a fire zone at any time, or a fault in a DAY/NIGHT burglary zone
during a disarmed period. Accompanied by a display of zone number in trouble.
FIRE:
Appears when a fire alarm is generated. Accompanied by a display of the zone in
alarm.
A FIRE display also appears when a fire alarm is manually activated,
accompanied by a display of emergency key zone number programmed for fire.
Appears when an alarm has been silenced by the Code + OFF sequence and will
remain on until another Code + OFF sequence is keyed.
About The Keypads
ALARM
FIRE
(Cont'd)
AWAY
NIGHT NO AC
PHONE TEST
BYPASS
NOT READY
STAY
CHIME BAT
CHECK INSTANT CANCELED
FIXED-WORD DISPLAY
6150disp