F
Press the {Interrupt} key again.
The interrupt key indicator goes off.
G
Replace the originals that you were copying, and then press the {Start} key.
Following message "
were copying.
Note
❒ The previous copy job settings are restored. Simply press the {Start} key to
continue copying from where it left off.
Left Original Beeper
The beeper sounds and an error message is displayed when you leave your orig-
inals on the exposure glass after copying.
Note
❒ For details, see "Copier/Document Server Features", General Settings Guide.
Reference
"Copier/Document Server Features", General Settings Guide
Copying onto Tab Stock
You can copy onto tab stock.
Important
❒ Before using this function, set the tray for tab stock and set the position of the
index tab. See "Items of Tray Paper Settings", General Settings Guide.
Reset x original(s).
GCINDX0E
GCINDX1E
", replace the originals that you
Basic Procedure
2
29