Table of Contents
Advertisement
D
Set an erase border width with [n] or [o].
Pressing [n] or [o] changes the width in increments of 1 mm (0.04"). Press-
ing and holding down the relevant key changes the width in increments of 10
mm (0.4").
If you select to erase the image on the back of the original, press [2 Sided Set-
ting] and [Back].
Erasing the image on the back is valid when you copy 2-Sided originals.
E
Press [OK].
F
Place the originals, and then press the {Start} key.
Note
❒ To change the value entered in step
ue.
Border Erase (different width)
This mode erases the edge margin of the original image.
A
Press [Edit].
B
Press [Erase Border].
C
Press [Different Width].
D
, press [n] and [o] to set a new val-
Copier Functions
2
97
Advertisement
Table of Contents
