Reverse Orientation
This function rotates the copy image by 180° ([
This is useful for copying torn originals. For example, if the left side of the orig-
inal is damaged and is difficult to set, position it as shown below.
A
Press [Reverse Orientation].
Note
❒ It is recommended you use this function together with the Auto Paper Se-
lect or Auto Reduce/Enlarge function.
❒ Copy results may differ depending on the combination of selected func-
tions.
Placing Originals on the Exposure Glass
Place originals on the exposure glass.
Important
❒ Do not lift the ADF forcefully. Otherwise, the cover of the ADF might open or
be damaged.
A
Lift the ADF.
Be sure to lift the ADF by more than 30°. Otherwise, the size of the original
might not be detected correctly.
] or [
APG004S
Placing Originals
]).
1
17