Table of Contents
Advertisement
Appendix
• Even if you place different size originals in the ADF, appropriate size of
copy paper can be automatically selected and stapled using the Mixed Size
mode and Auto Paper Select function. Load the paper you want to use in
the paper trays beforehand. Paper sizes that can be stapled when using the
Mixed Size mode are as follows:
• A3L and A4K
• B4 JISL and B5 JISK
• 11" × 17"L and 8
• Depending on the Z-fold settings, you may not be able to use Rotate Sort.
• Even if you have selected [Face Up] for Eject Copy Face up/Down in Glass
5
Mode, the copies will be delivered face down.
❖ Duplex
• Following types of paper sizes and directions allow the double-side copy.
A3L, B4 JISL, A4KL, B5 JISKL, A5L, 11" × 17"L, 8
" × 11"KL
1
8
/
2
• You cannot use the following copy paper with this function:
• Paper of a size smaller than A5, 5
• Translucent paper
• Label paper (adhesive labels)
• OHP transparencies
• Paper thicker than 105 g/m
• Paper thinner than 64 g/m
• Postcards
• Tab stock
• When an odd number of originals is placed in the ADF, the back of the last
page of copied paper is blank.
• During copying, the image is shifted to allow for the binding margin.
• Front and back image quality of copies may differ.
198
" × 11"K
1
/
2
ACC013S
" × 8
1
/
2
2
, 28 lb.
2
, 17 lb.
" × 14"L,
1
/
2
1
/
"
2
Advertisement
Table of Contents
