Seagull Models T-34 Mentor Assembly Manual page 14

T-34 MENTOR
5) Attach the motor to the front of the
electric motor box using four 4mm blind
nut, four M3x12mm hex head bolts to se-
cure the motor. Please see picture shown.
14
4 mm
.
.
Blind nut.
M3x12mm
Epoxy
145 mm
Instruction Manual.
Balsa stick.
6) Attach the speed control to the side
of the motor box using two-sided tape
and tie wraps. Connect the appropriate
leads from the speed control to the mo-
tor. Make sure the leads will not interfere
with the operation of the motor.
Tie-wraps.
Battery.
Epoxy