Final Checks; Final Fitting; Customer Care - Rangemaster professional+ fx 90 User's Manual & Installation Instructions

Table of Contents

Advertisement

INSTALLATION
Check the appliance is electrically safe when you have finished.

Final Checks

Fig. 7.12
Hob Check
Check each cooking zone in turn. Be sure to use pans of the
correct size and material.
Oven Check
Note: Make sure you have set the clock (see 'Section 2').
ArtNo.281-0026 - Front plinth
Turn on the oven. Check that the oven fans start to turn and it
starts to heat up. Check that the oven lights are working.
Turn off the oven.
Note: The oven light bulb is not included in the guarantee.

Final Fitting

Fitting the Plinth
Remove the 3 screws for the plinth mounts along the front
bottom edge of the range (Fig. 7.12). Fasten the plinth using
these screws (alternative colour screws can be found in the
loose parts pack).
Refitting the Oven Door
To refit the door, slide the hinges back into their slots. Rotate
the locking 'U' clips back to fit onto the hinges.

Customer Care

Please complete your details in this guide, inform the user
how to operate the cooker and hand over the Instructions.
Thank you.
26

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

Professional+ fx 90 induction

Table of Contents