Positioning The Cooker; Moving The Cooker - Rangemaster professional+ fx 90 User's Manual & Installation Instructions

ArtNo.092-0009 - Prof+ 90 FX Clearances #1
Fig. 7.1
75 mm
min
Fig. 7.2
900 mm min*
410 mm min
2.5 mm
Check the appliance is electrically safe when you have finished.
75 mm
min
650 mm
min
905 mm min
930 mm max
2.5 mm
**
INSTALLATION

Positioning the Cooker

The diagrams show the minimum recommended distance
from the cooker to nearby surfaces (Fig. 7.1 and Fig. 7.2).
The cooker should not be placed on a base.
The hotplate surround should be level with, or above,
any adjacent work surface. A gap of 75 mm should be left
between each side of the cooker ABOVE the hotplate level
and any adjacent vertical surface.
For non-combustible surfaces (such as unpainted metal or
ceramic tiles) this can be reduced to 25 mm.
A minimum space of 650 mm is required between the top of
the hotplate and a horizontal combustible surface.
*Any cookerhood should be installed in accordance with the
hood manufacturer's instructions.
**Any splashback must be fitted in accordance with the
manufacturers instructions. Allowance should be made for the
additional height of the flue trim, which is fitted to the cooker
hob.
Surfaces of furniture and walls at the sides and rear of the
appliance should be heat, splash and steam resistant. Certain
types of vinyl or laminate kitchen furniture are particularly
prone to heat damage and discolouration. We cannot accept
responsibility for damage caused by normal use of the
cooker to any material that de-laminates or discolours at
temperatures less than 65 °C above room temperature.
We recommend a gap of 905 mm between units to allow for
moving the cooker. If a flush fit is required, fit the cooker up
to the unit at one side then fit the unit the other side.
DO NOT box the cooker in – it must be possible to move the
cooker in and out for cleaning and servicing.
If the cooker is not installed between units, a side panel
extension that closes the gap to the wall at the rear is
available as an optional extra kit.

Moving the Cooker

On no account try and move the cooker while it is
n n
plugged into the electricity supply.
The cooker is very heavy, so take great care.
n n
We recommend two people manoeuvre the cooker. Make
sure that the floor covering is firmly fixed, or removed to
prevent it being disturbed when moving the cooker around.
To help you, there are two levelling rollers at the back and
two screw-down levelling feet at the front.
22