The Multifunction Oven - Rangemaster professional+ fx 90 User's Manual & Installation Instructions

A & B linked
Fig. 2.8
A
D
Fig. 2.9
ArtNo.326-0009 - Albertine SC - MF oven elements EU
A – Grill elements, B – Convection element, C – Base heat elements
Function Use
To thaw small items in the oven without
Defrost
heat
A full cooking function, even heat
Fan oven
throughout, great for baking
Grilling meat and fish with the door
Fanned grilling
closed
A full cooking function good for roasting
Fan assisted
and baking
A full cooking function for roasting and
Conventional oven
baking in the lower half of the oven
To brown and crisp cheese topped
Browning element
dishes
To crisp up the bases of quiche, pizza or
Base heat
pastry
B
C
E
Induction
C, D & E linked
A
B
C
Table 2.3
can immediately restart the Low Temperature function by
reactivating L1 or L2.
Power Boost Setting, P
All of the induction cooking zones have Power Boost
available, activated by turning the control knob clockwise
until [P ] is shown on the hob control display.
Power Boost allows additional power to be made available for
each of the cooking zones. This is useful to bring a large pan
of water to the boil quickly.
The Power Boost function operates for a maximum of 10
minutes on each zone, after which the power is automatically
reduced to setting 9.
When using the Power Boost function, the cooking zones are
linked.
Fig. 2.8 shows the hob layout. Zones A and B are linked
together as are zones C, D and E.
This means that when using zone A on Power Boost and then
switching zone B to power boost, then the power to zone A
will reduce slightly. The last zone switched to Power Boost
always takes priority. Zones C, D and E work in the same way.
This is a built in safety device.
n n
Deactivate the Power Boost function by turning the control
knob to a lower setting.
Overheat Function
This function identifies when the temperature of the pan rises
rapidly and works to maintain a safe level of pan temperature.
It should not interfere with normal cooking.
Cookware with bases that become distorted (Fig. 2.2) when
heated may interfere with the operation of the Overheat
Function. This may result in damage to your cookware or
Induction Glass Hob.
Please remember not to leave the hob unattended.
n n
Care should be taken to not allow your cookware to
boil dry. Damage to your cookware and Induction
Glass Hob may result.
Please read and follow the manufacturers' instructions
carefully before using cookware on your induction hob.

The Multifunction Oven

The oven is a multi-function oven (Fig. 2.9).As well as the
oven fan and fan element, they are fitted with two extra
heating elements, one visible in the top of the oven and the
second under the oven base. Take care to avoid touching
the top element and element deflector when placing or
removing items from the ovens.
The multi-function oven has 3 main cooking functions: fan,
fan assisted and conventional cooking. These functions
should be used to complete most of your cooking.
The browning element and base heat can be used in the
latter part of the cooking process to fine tune the results to
your particular requirements.
6