IBM pSeries 7311 D10 Service Manual page 95

b. Rotate the adapter so that the adapter engages the slot in the bottom adapter-retaining clip and the
top corner of the adapter is seated into the adjustable top adapter-retaining clip.
Note: If the adapter is not a full-height adapter, you must slide the adjustable top adapter-retaining
clip downward until the lower edge of the adapter is seated into the slot on the bottom
adapter-retaining clip.
1 Adapter 3 Bottom Retaining Clip
2 Slot
1
2
3
Chapter 3. Removal and Replacement Procedures
79