IBM pSeries 7311 D10 Service Manual page 92

c. The cassette linkage is marked to show long or short adapters similar to the adapter shown in the
following figure. Check the right end of the adapter to determine if it is long enough to fall into the
long area of the cassette linkage. Ensure that the corner on the left end of the adapter is still
aligned into the top adapter-retaining clip and determine the length of the adapter.
SHORT LONG
ARM
ARM
1
2
1 Top Adapter-Retaining Clip
76 Eserver pSeries 7311 Model D10 and Model D20 Service Guide