Model D20 Location Code Table - IBM pSeries 7311 D10 Service Manual

Model D20 Location Code Table

The following table lists the location codes for a model D20 I/O subsystem. The location code for the I/O
subsystem connected to a system unit is U0.dd (where dd can be any number from 2 through 63).
FRU Name
Model D20 I/O Drawer U0.dd (dd = any number from 2 through 63)
Rack frame
I/O drawer backplane
I/O subsystem drawer
RIO bus adapter
RIO port 1 upper connector
RIO port 1 cable
RIO port 0 lower connector
RIO port 0 cable
PCI bus controller PHB0
PCI to PCI bridge EADS-X
PCI bus controller PHB2
PCI to PCI bridge EADS-X
PCI slot 1
PCI card in slot 1
PCI slot 2
PCI card in slot 2
PCI slot 3
PCI card in slot 3
PCI slot 4
PCI card in slot 4
PCI slot 5
PCI card in slot 5
PCI slot 6
PCI card in slot 6
PCI slot 7
PCI card in slot 7
Power supply 1 (no internal blower)
Power supply 2 (no internal blower)
Cooling blower 1
Cooling blower 2
Cooling blower 3
32 Eserver pSeries 7311 Model D10 and Model D20 Service Guide
Physical Location Code
U0
U0.dd-P1
U0.dd
RIO Bus Adapter
U0.dd-P1.1
U0.dd-P1.1/Q1
U0.dd-P1.1/Q1#
U0.dd-P1.1/Q2
U0.dd-P1.1/Q2#
PCI Bus Controller
U0.dd-P1
U0.dd-P1
PCI Bus Controller PHB2
U0.dd-P1
U0.dd-P1
Pluggable Adapter Slots
U0.dd-P1/I1
U0.dd-P1-I1
U0.dd-P1/I2
U0.dd-P1-I2
U0.dd-P1/I3
U0.dd-P1-I3
U0.dd-P1/I4
U0.dd-P1-I4
U0.dd-P1/I5
U0.dd-P1/I5
U0.dd-P1/I6
U0.dd-P1/I6
U0.dd-P1/I7
U0.dd-P1/I7
Power Supply
U0.dd-V1
U0.dd-V2
Cooling Blowers
U0.dd-F1
U0.dd-F2
U0.dd-F3