Install The Chain - HySecurity SlideSmart DC User Manual

Install the Chain

4
Public Side
Trailing edge
of gate
Install the
Chain Brackets
1. Measure for proper chain
alignment BEFORE welding the
brackets to the gate. Make sure
the chain will run horizontal
to the ground and parallel with
the gate.
2. Weld the chain brackets to
d
and trailing edge.
the brackets as shown.
5. Feed the chain around the
idler wheels and over the sprocket.
Page 4
Chain
bracket
Connector link
Measure chain height.
Weld bracket to gate so
chain remains horizontal
and level.
Side View
INCORRECT
CORRECT
INCORRECT
Front edge
of gate
Secure Side
Install and Align the Chain
& &
Chain to Gate
Ideal distance =
(9.5cm)
NOTE &
Pedestrian gate
bolt
Chain bracket
ig
s s
CORRECT INSTALLATION
3¾"
Top View
Too close to gate
INCORRECT INSTALLATION
^ ^  / Z D .