2.11 Reinstalling The Power Supply Unit - Asus Terminator 2 Barebone System T2-PE1 Product Manual

2.11 Reinstalling the power supply unit

Reinstall the power supply unit (PSU) after installing the system
components and reconnecting the cables, .
To reinstall the PSU:
1. Connect the two 4-pin 12 V
power plugs to the ATX12V1 and
ATX12V2 connectors on the
motherboard. See page 4-6 for
the location of these connectors.
2. Connect the 24-pin ATX power
plug to the EATXPWR connector
on the motherboard. See page
4-6 for the location of this
connector.
3. Position the PSU over the
chassis.
4. Align the PSU side hook with the
metal slot located on the side of
the optical drive bay.
5. Slide the PSU toward the
direction of the rear panel until it
fits in place.
6. Secure the PSU with the screw
you removed earlier.
Make sure the PSU cables do
not interfere with the CPU
and/or chassis fans.
A S U S T 2 - P E 1 A S U S T 2 - P E 1 A S U S T 2 - P E 1 A S U S T 2 - P E 1 A S U S T 2 - P E 1
1 1 1 1 1
1 1 1 1 1
4 4 4 4 4
5 5 5 5 5
7 7 7 7 7
6 6 6 6 6
2 2 2 2 2
3 3 3 3 3
2 - 2 3 2 - 2 3 2 - 2 3 2 - 2 3 2 - 2 3