B Lade A Ttachment - Regency Deuce Hugger Owner's Manual

B a
laDe ttaCHMent
B a
lade ttachment
1. Place fiber washer on screw. Insert this assembly through the blade and start the screw into the blade tip. Repeat this
procedure without tightening the screw until all 3 screws have been started into the blade tip (Fig. 1).
2. Tighten each screw starting with center screw.
3 Insert the blade into the motor housing and fasten blade assembly to motor with provided screws and metal lock
washers (Fig. 2). Repeat procedure for the other blade. Make sure screws are TIGHT! Loose motor screws can contribute
to unnecessary humming and wobbling during operation.
NOTE: Cordless power screwdrivers are NOT recommended,
as they tend to strip the heads of the screws and usually will
not fully compress the spring washers on the motor screws.
Use a large flat blade screwdriver for final tightening to fully
compress the spring washers. This will help ensure proper
alignment of the blades and noise-free, wobble-free running.
Fan Motor
:
Blade To Motor Screw
Fig. 1
Blade Assembly
Fan Housing
Blade To Motor Screw
7
Blade
Blade Tip Screw
Blade Tip
Fig. 2