Regency Deuce Hugger Owner's Manual page 5

p
reparatiOn
p :
reparatIon
Verify that you have all parts before beginning the installation. Check foam insert closely for missing parts. Remove motor
from packing. To avoid damage to finish, assemble motor on soft padded surface or use the original foam inset in motor box.
Do not lay fan on its side as this could result in shifting of motor in decorative enclosure.
i
nstalling tHe
Caution:
To avoid possible electric shock, be sure electricity is turned off at the main power box before wiring. All wiring
must be in accordance with National and Local Electrical Codes and the ceiling fan must be grounded as a precaution against
possible electrical shock.
1. Locate ceiling joist where fan is to be mounted, being
sure location agrees with the requirements in the
minimum clearance section of this guide. Wood joist
must be sound and of adequate size to support 35 lbs.
(See Page 1, Items 3 and 4)
2. If not already present, mount a UL listed outlet
box marked "suitable for fan support", following
the instructions provided with the outlet box. The
outlet box must be able to support a minimum of 35
pounds.
3. Attach hanging bracket to outlet box using screws
provided with the outlet box.
Fan
Housing
Blade Tip
H B
anging raCket
Blade
Light / Cover
4
Electric Box
Mtg. Plate
Split Washer
Flat Washer
Mtg. Screw