Appendix B Installing Drives; Second Floppy Disk Installation; Programming Jumper - Zenith Z-200 series Owner's Manual

Appendix B
Installing Drives
Second Floppy Disk Drive Installation
Before a second floppy disk drive may be installed, the cover of the com­
puter must be removed. Follow the instructions under Cover Removal
in Appendix A.
Refer to Figure B.1 for the following steps. These instructions are for the
installation of all models of floppy disk drives. For configuration of 360K
floppy drives, refer to 360K Floppy Drive Configuration later in this appen­
dix.
D
Figure B.1. Programming Jumper