Cover Removal - Zenith Z-200 series Owner's Manual

Appendix A
Installing Options
Cover Removal
Refer to Figure Al for the cover removal procedure.
D
Turn off the computer and unplug the line cord from the
AC
outlet.
WARNING: Hazardous voltages may be present inside the computer
whenever the line cord is connected to an
AC
outlet. Do not begin disas­
sembly before unplugging the unit.
D
If a monitor is connected to the computer, disconnect its cable and
set the monitor aside. Also disconnect the cables of any other
peripherals connected to the computer and set them aside.
D
Make sure that the keyboard lock is in the fully clockwise position
(unlocked).
D
Remove and save the six screws that secure the top cover to the
unit.
D
Remove the cover by sliding the cover to the front while holding
it up to avoid catching any wires, cables, or connectors. Set the
cover to one side. /
./'"
Figure
A.I.
Cover Removal