Fog Lamps - SMART 2016 fortwo Operator's Manual

Exterior lighting
68
conditions such as spray. There is a risk of
an accident.
In such situations, turn the light switch to
L.
The automatic headlamp feature is only an
aid. The driver is responsible for the vehi-
cle's lighting at all times.
Low-beam headlamps
To switch on: turn combination switch con-
X
trol : until L is at marking ;.
The L indicator lamp in the instrument
cluster lights up.
Parking lamps
To switch on: turn combination switch con-
X
trol : until T is at marking ;.
Canada only: the standing lamps are only
switched on when the engine is switched off.
When the engine is running, the low-beam
headlamps are switched on.
Front fog lamps
Only vehicles with front foglamps have the
"Foglamps" function.
To switch on: make sure that the standing
X
lamps or low-beam headlamps are switched
on.
Turn combination switch middle ring E
X
until marking D is at N.
The N indicator lamp in the instrument
cluster lights up.
After releasing, the middle ring returns
automatically back to the neutral position.
To switch off: turn combination switch
X
middle ring E until marking D is at
N.
The N indicator lamp in the instrument
cluster goes out.
After releasing, the middle ring returns
automatically back to the neutral position.
i
If you switch off the engine (only in the
à position) or turn off the lights, the
foglamps are also switched off.
Rear fog lamp
To switch on: make sure that the fog lamps
X
or low-beam headlamps are switched on.
Turn combination switch middle ring E
X
until marking D is at R.
The R indicator lamp in the instrument
cluster lights up.
After releasing, the middle ring returns
automatically back to the neutral position.
To switch off: turn combination switch
X
middle ring E until marking D is at
R.
The R indicator lamp in the instrument
cluster goes out.
After releasing, the middle ring returns
automatically back to the neutral position.
i
If you switch off the engine (only in the
à position) or turn off the lights, the
rear foglamps are also switched off.
Switching on the turn signals
Start the engine.
X
To indicate briefly: press the combination
X
switch briefly to the pressure point in the
direction of arrow : (right turn signal)
or ; (left turn signal).
The corresponding turn signal flashes
three times.
To indicate: press the combination switch
X
beyond the pressure point in the direction
of arrow : (right turn signal) or ; (left
turn signal).