Temperature Display - SMART 2016 fortwo Operator's Manual

Hide thumbs Also See for 2016 fortwo:
Table of Contents

Advertisement

Press the 9 or : button on the steer-
X
ing wheel to select the display of current
fuel consumption.
The display shows the fuel consumption over
the previous 15 minutes as a bar chart. The
display additionally shows the current fuel
consumption as a numeric value in the upper
right section of the display.
If you switch off the ignition, or change the
distance unit, the fuel consumption data is
deleted automatically.
You can change the distance unit in the
play
submenu (
page 116).
Y
Coolant temperature menu
Under normal operating conditions and with
the specified coolant level, the coolant tem-
perature may rise to 230 ‡ (110 †).
Example: coolant temperature
Press the 9 or : button on the steer-
X
ing wheel to select the coolant temperature
display.
The display shows the current coolant tem-
perature as a bar in the range between 50
and 110 †.
If the coolant temperature rises above
110 †, then the display shows a display
message (
page 125). Observe the display
Y
message. You could otherwise damage the
engine.
You can change the temperature unit in the
Display
submenu (
page 116).
Y
Messages and service menu
Example: messages and service
If you have hidden display messages these are
Dis‐
saved in the message memory. The menu shows
the number of display messages in message
memory : and next service due date ;
(
page 153). The message memory can only be
Y
called up when the ignition is switched on.
Press the 9 or : button on the steer-
X
ing wheel to select the
vice
menu.
The display shows the number of display
messages in the message memory and the
next service due date.
If there are no display messages, then the
value in brackets is 0 and the information
on the a button is hidden.
To show display messages: press the a
X
button on the steering wheel.
The lower area on the right of the display
shows the display message, its list number
and then number of display messages in the
message memory.
Press 9 to scroll through the display
X
messages in the message memory.
Pressing : only allows you to scroll
back to messages which have already been
read.
If you scroll back from the first display
message using :, the
Service
menu will again be shown in the
display. Existing display messages are not
shown.
Menus and sub menus
Messages and Ser‐
Messages and
113
Z

Advertisement

Table of Contents
loading

This manual is also suitable for:

Smart fortwo 2015

Table of Contents