Fog Lamps - SMART 2016 fortwo Owner's Manual

Parking lamps
To switch on: turn combination switch con-
X
trol : until T is at marking ;.
Canada only: the parking lamps are only
switched on when the engine is switched off.
When the engine is running, the low beam
headlamps are switched on.
Front fog lamps
Only vehicles with front fog lamps have the
fog lamps function.
To switch on: make sure that the parking
X
lamps or low beam headlamps are switched
on.
Turn combination switch middle ring E
X
until marking D is at N.
The N indicator lamp in the instrument
cluster lights up.
After releasing, the middle ring returns
automatically back to the neutral position.
To switch off: turn combination switch
X
middle ring E until marking D is at
N.
The N indicator lamp in the instrument
cluster goes out.
After releasing, the middle ring returns
automatically back to the neutral position.
i
If you switch off the engine (only in the
à position) or turn off the lights, the
foglamps are also switched off.
Rear fog lamp
To switch on: make sure that the fog lamps
X
or low beam headlamps are switched on.
Turn combination switch middle ring E
X
until marking D is at R.
The R indicator lamp in the instrument
cluster lights up.
After releasing, the middle ring returns
automatically back to the neutral position.
To switch off: turn combination switch
X
middle ring E until marking D is at
R.
The R indicator lamp in the instrument
cluster goes out.
After releasing, the middle ring returns
automatically back to the neutral position.
Exterior lighting
i
If you switch off the engine (only in the
à position) or turn off the lights, the
rear foglamps are also switched off.
Switching on the turn signals
Start the engine.
X
To indicate briefly: press the combination
X
switch briefly to the pressure point in the
direction of arrow : (right turn signal)
or ; (left turn signal).
The corresponding turn signal flashes
three times.
To indicate: press the combination switch
X
beyond the pressure point in the direction
of arrow : (right turn signal) or ; (left
turn signal).
Switching on the high beam headlamps
and high beam flasher
High-beam headlamps
To switch on: start the engine.
X
Turn the combination switch control until
X
K or à (if available) is at the mark-
ing.
69
Z