Table of Contents
Advertisement
Switching on the high-beam headlamps
and headlamp flasher
High-beam headlamps
To switch on: start the engine.
X
Turn the combination switch control until
X
K or à (if available) is at the mark-
ing.
Press the combination switch beyond the
X
pressure point in the direction of
arrow :.
The K indicator lamp in the instrument
cluster lights up.
To deactivate: move combination switch :
X
back to its normal position.
The K indicator lamp in the instrument
cluster goes out.
High-beam flasher
To switch on: pull the combination switch
X
in the direction of arrow ;.
Hazard warning lamps
Interior lighting
The hazard warning lamps automatically
switch on if:
an air bag is deployed
R
the vehicle decelerates rapidly from a
R
speed of above 45 mph (70 km/h) and comes to
a standstill
To switch on the hazard warning lamps:
X
press button :.
All turn signals flash. If you now switch on
a turn signal using the combination switch,
only the turn signal lamp on the corre-
sponding side of the vehicle will flash.
To switch off the hazard warning lamps:
X
press button :.
The hazard warning lamps switch off automat-
ically if the vehicle reaches a speed of above
6 mph (10 km/h) again after a full brake appli-
cation.
i
The hazard warning lamps still operate if
the ignition is switched off.
Headlamps fogged up on the inside
Certain climatic and physical conditions
may cause moisture to form in the headlamp.
This moisture does not affect the function-
ality of the headlamp.
Interior lighting
Overview
Interior lighting
:
Switches the left-hand reading lamp
;
on/off
Depending on the position of the switch:
=
Interior lighting switched on
Automatic interior lighting control on
69
Z
Advertisement
Table of Contents
